Archive

UDK: 624.134.001.2
DOI: n/a

Published: Građevinar 62 (2010) 1
Paper type: Subject review
Download article (Croatian): PDF
Download article (English): n/a

Design and realization of side-cuts in flysch rock mass

Danijela Jurić-Kaćunić, Meho Saša Kovačević

Abstract

The methodology applied in the design and realization of the system used to stabilize side cuts in flysch rock formations in Rijeka area is described. Rock mass properties were determined, and strength and deformability parameters were described, on the basis of investigation results, experience gained during stabilization of side cuts in flysch formations, and using results of measurement and monitoring activities conducted during back analyses of stress/strain properties.

Keywords
stability, investigations, stress/strain state, flysch rock mass, side cut, design

HOW TO CITE THIS ARTICLE:

Jurić-Kaćunić, D., Kovačević, M. S.: Design and realization of side-cuts in flysch rock mass, GRAĐEVINAR, 62 (2010) 1

OR:

Jurić-Kaćunić, D., Kovačević, M. S. (2010). Design and realization of side-cuts in flysch rock mass, GRAĐEVINAR, 62 (1)
Authors:
MARCIC Danijela WEB2
Danijela Jurić-Kaćunić
University of Zagreb
Faculty of Civil Engineering
Department for Geotechnical Engineering
Kovacevic MS
Meho Saša Kovačević
University of Zagreb
Faculty of Civil Engineering
Department for Geotechnical Engineering