Archive

UDK: 628.16.001.8:621-39
DOI: n/a

Published: Građevinar 61 (2009) 2
Paper type: Preliminary report
Download article (Croatian): PDF
Download article (English): n/a

Optimizing rinsing process for the rapid water-conditioning filters

Dalibor Carević, Goran Lončar, Vladimir Andročec

Abstract

The rinsing process optimization for rapid filters of water conditioning plants was conducted by means of an appropriate hydraulic physical model testing. The optimization was aimed at defining the minimum time needed to complete the entire rinsing process without damaging the floor stability, and with a minimum loss of filtering material. The hydraulic physical model test results were compared with measurement results obtained at the filtering field on a real-size device.

Keywords
water conditioning, rinsing, process, optimization, physical model, rapid filter

HOW TO CITE THIS ARTICLE:

Carević, D., Lončar, G., Andročec, V.: Optimizing rinsing process for the rapid water-conditioning filters, GRAĐEVINAR, 61 (2009) 2

OR:

Carević, D., Lončar, G., Andročec, V. (2009). Optimizing rinsing process for the rapid water-conditioning filters, GRAĐEVINAR, 61 (2)
Authors:
Dalibor Carevic WEB
Dalibor Carević
University of Zagreb
Faculty of Civil Engineering
GLoncar WEB
Goran Lončar
University of Zagreb,
Faculty of Civil Engineering

Vladimir Andročec
University of Zagreb,
Faculty of Civil Engineering